升降機廠家提醒，正確的操作上海升降機可以延長其使用壽命。Shanghai elevator manufacturers to remind the correct operation of the Shanghai lift can extend its service life.

1.升降機作業前，上海升降機廠家的工作負責人應向操作人員，進行技術和安全交待，內容應包括：工作內容及要求；安全注意事項及危險點；人員分工情況及責任范圍。Shanghai elevator operations, Shanghai elevator manufacturers responsible person should be accountable to the operators, technology and safety, the content should include: the contents and requirements of the work; safety precautions and dangerous point; division of labor and responsibility.

2.使用升降機必須配置經過專門培訓，考試合格，持證上崗的專業操作人員。Shanghai elevator must be configured with specialized training, examination qualified, professional operation personnel certification.

3.升降機操作人員必須按照機械設備的保養規定，在執行各項檢查和保養后方可啟動上海升降平臺，工作前應檢查液壓液壓升降機的工作范圍，清除妨礙升降平臺車回轉及行走的障礙物。Shanghai elevator operation of mechanical equipment maintenance personnel must be in accordance with the provisions in the implementation of the inspection and maintenance before the start of Shanghai Shanghai check the hydraulic lifting platform, hydraulic lift range should be before work, remove obstacles in the way of walking and rotary lifting platform car.

4.支撐是升降機操作的一項重要準備工作，應選擇平整的地面，如地基松軟或起伏不平，必須用枕木墊實后，才可進行工作。Support is an important preparatory work of Shanghai elevator operation, should choose a flat surface, such as foundation is soft or rough, must use the sleeper pads after, can work.

5.升降機一般應先起下臂，再起中臂，最后起上臂。在液壓升降臺回轉操作過Shanghai elevator general should play under the arm in arm, back, arm end. During the operation of the hydraulic lifting platform, it is necessary to carry out the rotation when the lower arm reaches a certain height, and the rotation should be slow. 程中，必須在下臂起升一定高度后方可進行回轉，回轉應緩慢，同時注意剪臂及平臺對各設備的距離是否滿足安全需要。

6.升降機工作平臺上的操作人員應佩帶安全帶，在帶電區域工作時，應將車體按規定進行接地，液壓升降臺登高作業應由工作負責人進行指揮，負責人應按照GB5082標準規定信號與上海升降平臺操作工進行聯系。Shanghai lift work platform on the operation of personnel should wear a safety belt, in charged areas of work, should be the body of the ground in accordance with the regulations, the hydraulic lifting platform climbing should be responsible person for the command, who should be responsible for the contact signal and Shanghai lifting platform operators in accordance with the GB5082 standard.